Day 1: Tuesday, 5th February 2013

Structural precast construction 1 – Built examples, technical concepts

Title

Titel

Tour Total Berlin – a perfect architectural concrete example

Tour Total Berlin - Architekturbeton in Perfektion

Dipl.-Ing. Hubertus Dreßler

TaunusTurm Frankfurt – precast elements in high-rise construction

TaunusTurm Frankfurt - Betonfertigteile im Hochhausbau

Dr.-Ing. Hubert Bachmann

Spalling above intact near-surface aggregate particles? – A defect despite passed freeze-thaw test?

Abplatzungen über gesunden, oberflächennahen Gesteinskörnern - Mangel trotz bestandener Frostprüfung?

Prof. Dr. jur. Gerd Motzke, Dr.-Ing., Jürgen Krell

Environmental Product Declarations (EPD) for cement and...

Issue 02/2017 New findings and forecast models

Freeze-thaw attack and damage

The freeze-thaw damage pattern of concrete is primarily linked to the water contained in the pore system, which is also referred to as the saturation level. If a certain critical saturation level is...

Issue 12/2019

Assessment of frost and freeze-thaw damage to concrete pavers (Part 1)

High weather resistance of concrete pavers is crucial wherever paved surfaces are exposed to frequent freeze-thaw cycles. In this respect, it should be noted that the climatic conditions prevailing in...

Issue 01/2020

Assessment of frost and freeze-thaw damage to concrete pavers (Part 2)

The first part of this article dealt with the different patterns associated with freeze-thaw damage, the impact of cracks occurring in products, and the influence of installation and use on the onset...

Issue 02/2013 Current findings with respect to the XF2 freeze/thaw test method

Freeze/thaw resistance at moderate water saturation levels

Generally accepted, internationally recognized methods (CIF and CDF) exist for testing the freeze/thaw resistance of concrete at high water saturation rates irrespective of the simultaneous action of...

Issue 02/2013 A defect despite passed freeze-thaw test?

Spalling above intact near-surface aggregate particles?

Depending on the exposure class, commonly applied concrete codes and standards specify the characteristics for raw materials and limit values for the concrete mix, assuming that the concrete will be...