Reinforcing steel in coils

Current specifications and new developments

Reinforcing steel in coils has been produced since the mid-1980s and is used and processed at bending shops and precast plants. Since then, the steel grades B500A (previously BSt 500 KR) and B500B (previously BSt 500 WR) have been continuously improved and subjected to “new” rules and standards. Following the earlier approval and quality control guidelines published in 1985 and 1993, reinforcing steel in coils was included in the DIN 488 standard in 2009. Since then, it has been subject to the same degree of standardization as bar steel. Existing approvals were withdrawn as a result.

For...

Related articles:

Issue 12/2009 A new Filigran approval in unison with the current design standard

Reinforcing steel BSt 500 KR in coils for DIN 1045-1:2008-08

Although the 2009 published standard DIN 488:2009-08 for reinforcing steel in Part 3 also regulates reinforcing steel in coils. This standard, however, has not been added yet to the “Bauregelliste A...

more
Issue 01/2016

Notes on the quality testing of reinforcing steel according to DIN 488-6:2010

DIN 488-6 was published in 2010 and introduced by the building authorities a short time later with all other parts. From test results and experience in external monitoring according to...

more
Issue 12/2023 EUROBEND

The Flexiline series – straightening quality meets flexibility

The Eurobend Flexiline rotor straighteners are delivered in different configurations with up to six 5G rotors with hyperbolic rollers. Each rotor is dedicated to a diameter. Diameters up to 25 mm are...

more
Issue 05/2021 SMC/PEDAX

Pedax double bending centers put reinforcing steel into perfect shape

Before putting reinforcing steel into use at the construction site, it must be precisely straightened, cut and bent into shape, either from coil or rod, from material up to 50 mm diameter. For...

more
Issue 08/2014 Schöck Bauteile

First technical approval for fiberglass ­reinforcing bar in Germany

The German approval body for construction products and types of construction (DIBt)  recently approved the straight Schöck ComBar fiberglass reinforcing bar in nominal diameters of 8, 12, 16, 20,...

more