Sandwich elements of lightweight aggregate concrete (LAC) with open structure

Highly insulating three-layer external wall elements

The European Union has made it its goal to considerably lower CO2 emissions in the coming years. To achieve this goal, a number of directives, laws and regulations were passed, amended, and made stricter. The monolithic wall elements of lightweight aggregate concrete with open structure (LAC = Lightweight Aggregate Concrete) can satisfy the more stringent requirements on building engineering physics with wall cross-sections of appropriate thickness. The U-value of 0.28 W/(m²K) specified and/or recommended in the new Energy Savings Regulation (EnEV 2014) are in this manner achieved without...

Related articles:

Issue 02/2021

Shear resistance of wall elements made of LAC

Lightweight concrete with open structure and lightweight aggregate is increasingly used for the construction of façades due to its excellent thermal insulation properties. Pumice, which occurs...

more
Issue 02/2015 Day 2: Wednesday, 25th February 2015

Lightweight concrete

116 Prefabricated reinforced components of lightweight aggregate concrete - The new DIN EN 1520 Vorgefertigte Bauteile aus haufwerksporigem Leichtbeton – Die neue DIN EN 1520 Univ.-Prof. Dr.-Ing....

more
Issue 02/2020 Lightweight aggregate concrete with open structure

Structural capacity of self-supporting wall panels made of LAC

Lightweight concrete with open structure and lightweight aggregate is increasingly used for the construction of façades due to its excellent thermal insulation properties. Pumice, which occurs...

more
Issue 04/2021 PHILIPP GRUPPE

Flat anchors for lightweight concrete sandwich elements

Classical systems for connecting, as a general rule, three-layer sandwich elements, such as flat anchors, sleeve anchors or SPAs, as well as plastic-based systems are approved without exception for...

more
Issue 04/2013 F.C. Nüdling GmbH

Liapor NeoStone provides excellent thermal insulation

When building a house, there are several ways to comply with the statutory provisions concerning energy saving standards: Often single-skin masonry constructions are used in combination with a...

more