Goldbeck invests in Treuen location

The traditional groundbreaking ceremony marks the start of extensive work ahead (from left): Dr. Wulf Härtel, Geschäftsführer Goldbeck Bauelemente Treuen GmbH; Lars Luderer, Geschäftsführer Goldbeck GmbH; Hagen Sczepanski, Präsident IHK Plauen; Jörg-Uwe Goldbeck, geschäftsführender Gesellschafter Goldbeck GmbH; Rolf Keil, Landrat des Vogtlandkreises; Andrea Jedzig, Bürgermeisterin Stadt Treuen; Ortwin Goldbeck, Gründer Goldbeck GmbH; Dr. Dieter Pfortner, Präsident IHK Chemnitz; Jörg Bechmann, Leiter Goldbeck-Niederlassung Sachsen und Mirko Zeng, Geschäftsführer Goldbeck Ost GmbH (Figure: Goldbeck)

The traditional groundbreaking ceremony marks the start of extensive work ahead (from left): Dr. Wulf Härtel, Geschäftsführer Goldbeck Bauelemente Treuen GmbH; Lars Luderer, Geschäftsführer Goldbeck GmbH; Hagen Sczepanski, Präsident IHK Plauen; Jörg-Uwe Goldbeck, geschäftsführender Gesellschafter Goldbeck GmbH; Rolf Keil, Landrat des Vogtlandkreises; Andrea Jedzig, Bürgermeisterin Stadt Treuen; Ortwin Goldbeck, Gründer Goldbeck GmbH; Dr. Dieter Pfortner, Präsident IHK Chemnitz; Jörg Bechmann, Leiter Goldbeck-Niederlassung Sachsen und Mirko Zeng, Geschäftsführer Goldbeck Ost GmbH (Figure: Goldbeck)
The Mittlerer Ring is welcoming new growth as the construction and service company Goldbeck expands its production capacities in Treuen. For Goldbeck Bauelemente Treuen GmbH, a new factory building with an office extension for sheet metal production will be built at the location by the end of April 2023. On Tuesday 26 April 2022, the client celebrated the traditional groundbreaking ceremony together with local councillors. “This new factory building represents our commitment to investing not only in our Treuen location, but also in the future of the entire company,” explains Lars Luderer, Managing Director of Goldbeck GmbH.

The groundbreaking ceremony marks the start of extensive work ahead, with space for automated production being created over an area spanning around 7,000 square metres. Going forward, roof and facade edge parts as well as cassettes for facades and panels in particular will be produced here – system components that can be found in every Goldbeck product. “Our plant in Treuen is an important manufacturer of these construction elements for Goldbeck,” explains Dr Wulf Härtel, Managing Director of Goldbeck Bauelemente Treuen GmbH. “This new facility for sheet metal production will allow us to double our production capacities in Treuen and acknowledge the positive development of our incoming orders in the process.” The new factory building is complemented by an office extension spanning around 1,200 square metres. Among other things, this provides breakout spaces and changing rooms for the production staff. “It is important to us to create an excellent environment and a high quality of life for our employees in these areas,” stresses Dr Wulf Härtel. After all, the expansion of the company’s production capacities is also creating new workspaces.

Goldbeck is bringing the project to life through its usual systematic construction method, whereby essential elements are industrially prefabricated, delivered to the construction site and then assembled on site within a very short time. In addition to cost and schedule reliability, this construction method offers the further advantages of conserving resources and cutting down on a considerable part of the CO2 emissions that are usually produced. Furthermore, Goldbeck is aiming for a gold certification from the DGNB (German Sustainable Building Council) for its new building, which will even feature a photovoltaic system on the roof. “Once the building is complete, we will be planting 32 deciduous trees and 2,000 square metres of native shrubs around the site and even installing nesting boxes for birds,” enthuses Lars Luderer.

The family-owned company has been operating in Treuen since 1992, back when Goldbeck only had around 30 employees. Today, the location is one of the largest employers in the region with a current total of more than 1,000 staff. “The new building provides us with scope for further growth and the opportunity to continue on our positive development trajectory,” says Lars Luderer about the project.

 

CONTACT

Goldbeck GmbH

Ummelner Straße 4-6

33649 Bielefeld/Germany

+49 521 94880

www.goldbeck.de

Related articles:

Issue 09/2017 Masa

Spare parts distribution hall increases capacities

Recently, Masa GmbH has commissioned a new factory hall for the distribution of spare parts on the premises in Andernach. The building provides appropriate space and optimum weather protection for...

more
Issue 02/2017 Schöck Bauteile

Change of location in Hungary for higher capacities

At the beginning of December 2016, the new production site of Schöck Hungaria Kft. in Pilis, southeast of the Hungarian metropolis of Budapest, was formally opened. The extension of production area...

more
Issue 02/2023 GOLDBECK

New precast concrete plant in Kirchberg expands production capacities

Goldbeck starts construction of its eighth precast concrete plant in Europe. On the newly developed site in Kirchberg, Rhineland-Palatinate, the company will once again significantly expand its...

more
Issue 01/2023 GOLDBECK

Sustainable partnership: Siemens and Goldbeck conclude agreement

In 1965, Siemens opened a research center in the south of Erlangen, Germany. Since then, thousands of the company’s innovations have been tested and brought to serial production. Since 2014, the site...

more
Issue 06/2021 WIGGERT

New building for in-house production in Karlsruhe

In order to meet the growing demand for more space to accommodate increasing in-house production, Wiggert & Co. GmbH has now started the new construction of a production building. With this measure,...

more