H-Bau Technik

CE marking for Pentaflex

Figure: H-Bau Technik

Product Development Manager, Benjamin Happ (left), and Quality Assurance Manager, Christian Beständig (right), in good humor after the European Technical Assessment has been granted

Figure: H-Bau Technik

The standardized line enables monitoring the minimum installation depth of the Pentaflex joint plates during concrete placement without any problems, not requiring any elaborate remeasuring. A concrete cover of 30 mm is adequate to withstand a water pressure of 2.0 (according to ETA and national technical test certificate)

Figure: H-Bau Technik

Several times a day, especially trained workers check the thickness of the special coating by means of modern measurement technology

Figure: H-Bau Technik

Just recently, H-Bau Technik GmbH, Klettgau, has been granted the CE marking for the Pentaflex sealing system through the “European Technical Assessment” (ETA). Thus, the specialist in construction technology based in South Baden clears the way for an international exchange of coated joint plates.

In Germany the applicable construction product lists of the German Institute for Construction Technology (DIBt) stipulate whether the marking is mandatory or not. Products not regulated therein need to have a verification of suitability such as the German national technical test certificate before...