Day 3: Donnerstag, 20th February 2014

Concrete in Structural Engineering

171 Waterproof concrete basements – Checklist for effective design by classification
Weiße Wannen – Checkliste für effektives Planen durch Klassifizierungen
Dipl.-Ing. Karsten Ebeling
174 Shear design for biaxial loading and circular sections
Querkraftbemessung bei zweiachsiger Beanspruchung oder Kreisquerschnitten
Prof. Dr.-Ing. Peter Mark
176 Simplifying design – Combinations of actions relevant to the design of reinforced-concrete members in conventional multi-story construction
Einfacher Planen – Maßgebende Einwirkungskombinationen zur Bemessung von Stahlbetonbauteilen im üblichen Hochbau
Prof....

Related articles:

Issue 02/2017 Questions and answers

Punching shear design in practice

With introduction of Eurocode 2 in Germany (DIN EN 1992-1-1/NA [1] [2]) in 2012, the punching shear design provisions for flat slabs and column bases were revised compared to DIN 1045-1 [3]....

more
Issue 02/2014 New design tools for practice

Punching shear –

While DIN EN 1992-1-1 and the national annex of Germany treat punching shear design for in-situ concrete slabs and centrically loaded footings in great detail [1, 2], joints between semi precast...

more
Issue 02/2019 New experimental results on punching shear behavior of flat slabs with varying amount of punching shear reinforcement

Reduction of punching shear reinforcement

With introduction of Eurocode 2 in Germany, the punching shear design provisions for flat slabs were revised. In consequence of limited anchorage conditions of punching shear reinforcement elements in...

more
Issue 10/2018 FILIGRAN TRÄGERSYSTEME

Filigran punching shear reinforcement newly assessed

The FDB Filigran punching shear reinforcement consists of spatial welded reinforcement elements with optimized geometry. The punching shear resistance of flat slabs is more than doubled by using FDB,...

more
Issue 05/2024

Influence of various degrees of punching-shear reinforcement and -elements on punching-shear behavior

The current design concept of Eurocode 2 (EC2) provides contributions of concrete and shear reinforcement for the design of flat slabs with stirrups as punching-shear reinforcement. Here, a reduced...

more