European product standard or German approval?

Erection state of lattice-girder floors

Lattice girders in floor plates for floor systems in the erection state of prefabricated reinforced-concrete slabs ensure their flexural strength and shear resistance as well as their bending stiffness. Application and design rules used to determine permissible erection spans are found in both the German national approvals for lattice girders and in product standard EN 13747 (1) for floor slabs with in-situ concrete topping. The regulations differ and result in different permissible erection spans and different safety levels.
EN 13747 had already become a binding requirement years ago. In...

Related articles:

Issue 08/2011 Load tests

Long erection spans with strengthened lattice girders

Precast floor plates for floor systems consist of precast reinforced-concrete slabs of 5 cm thickness in which lattice girders are incorporated (Fig. 1) and an insitu concrete topping, which, when...

more
Issue 09/2010 Safe Transport of 15.3 m long Filigran Slabs

Precast Plant Dobler is Manufacturing with Strengthened Filigran EV lattice girders

The engineering consultancy of  Dr. Schütz Ingineure based in Kempten selected the static system and the dimensioning. The slab was chosen to be 34 cm thick and constructed as a semi-precast slab by...

more
Issue 08/2017

Lattice girder floor slabs – tested application as a point-supported slab

To verify the load-bearing capacity of buildings or structural components, the planning engineer uses engineering models. These are secured – in particular in the case of construction with reinforced...

more
Issue 04/2016 Filigran Trägersysteme

Great interest in concrete components with lattice girders

In February, Filigran Trägersysteme GmbH & Co. invited to the seminar series on “Filigran building components in accordance with Eurocode 2”. The seminars which took place on five dates in the...

more
Issue 08/2013 Research project of TU Vienna

Thin-walled precast concrete girders for bridge construction and civil engineering

In building and industrial construction, lattice-girder floor slabs and double-wall elements have been successfully used for years. These semi-precast elements of 5-7cm thickness serve as permanent...

more