Jordahl/RAL

Quality label for anchoring and fastening systems

The RAL Gütegemeinschaft Verankerungs- und Bewehrungstechnik e.V. (RAL Quality Association for Anchoring and Fastening Systems) awarded the RAL quality label to the following Jordahl products: JTA W and K anchor channels, JXA W toothed channels, JGB railing fastening channels, hooked-head bolts, toothed bolts, hammer-head bolts, JTB profiled metal sheet channels, and JDA punching shear reinforcement. As part of a neutral test, Berlin-based Jordahl GmbH provided proof that its products met the relevant requirements.

RAL quality label as a criterion in calls for tender

On the occasion of the award...

Related articles:

Issue 06/2017 Jordahl

Fastening anchor channels with installation cones

High quality demands are placed on precast elements made of reinforced concrete. They pose a particularly high challenge with regard to the geometry. This also applies to the built-in components such...

more
Issue 08/2013 Jordahl

Anchor channels for the Jade-Weser-Port

The only tide-independent deep-water container port in Germany opened for business in the fall of 2012 in Wilhelmshaven, following a 7-year planning, approval and tendering phase, and a construction...

more
Issue 09/2010 Proven Fastening System

Jordahl® Anchor Channels Used in the First Mercedes Plant in Hungary

Production and assembly halls as well as service buildings covering an overall floor space of more than 230,000 sq.m will be constructed. The construction site has the size of roughly 650 soccer...

more
Issue 01/2021 POHLCON

Anchor channels with bolts for dynamic loads

The movements caused by dynamic loads of attachment parts are increased if a hole clearance exists around the fastening element. The movements have an unfavorable effect both in the long term and in...

more
Issue 05/2010 Embedded parts

Fastening system for tubbing construction

A foam filling is inserted in the Jordahl® channels as to prevent concrete penetrating in the same. Precise mounting of the anchor channels is achieved by a fixing system at the bottom of the...

more